单组份丙烯酸弹性防水涂料是以丙烯酸与多种高分子聚合物乳液为基料,添加无机填料、助剂复合而成的一种单组份水性环保高分子防水涂料涂膜材料。
Introduction
based on acroleic acid and many kinds of high molecular polymer cream, single component acroleic acid flexible waterproof is a kind of single component aqueous environmental waterproof material compounded with inorganic filler and assistance.
产品特点
1、水基高分子材料,无有机溶剂污染、无气味、无毒害、绿色环保;
2、即开即用,施工简易,适合工程和家居防水;
3、涂层为白色,可加颜料配制成多种色彩;
4、延伸性好,粘结强度高,在潮湿和干燥基层均可施工,与基层和外保护装饰层有良好的粘结性能;
5、涂膜有良好的耐水性和抗拉性能,又具有很好的低温柔性;
6、耐候性强,特别适用于不能做保护层的彩钢屋面的防水工程。
Features
1. water-based high polymer material, no pollution of organic solvent, no smell, no poison and green.
2. out of the box, easy to construct, suitable for engineering and household waterproof.
3. coating is white, could add dyestuff for different colors.
4. good extension, strong adhesion, available for both dry and moist base plane, bonding well with base plane and outer protection decoration.
5. coating film has good resistance to water and dragging and is also with high flexibility at low temperatures
适用范围
单组份丙烯酸弹性防水涂料掺入水泥适用于建筑物多种砌体材料的内外墙抹灰、内外墙装饰涂料的底灰、饰面腻子批刮、各种饰面砖的粘贴、新旧建筑物的维修和修补、界面处理以及建筑物各部位的防水找平层施工。
Applications: inner and outer wall plastering, bottom ash of decorative paint, finishing puppy shaving, paste of all kinds of face brick, maintenance and repair, interface process, and waterproof leveling blanket of all parts of the building.
施工方法
1、基层要求:基面平整、结实、无明水、无油污、无尘土。阴阳角,管根及其它细部预先做加强处理,并作附加层处理,可以用无纺布或玻纤布做为增加材料。
2、分层涂刷:用刮板或者滚筒将涂料均匀地涂刷在基层上,以不露底为宜,细处可用小毛刷涂刷。
3、面层涂布:加水稀释该防水涂料在表层滚涂一遍,以提高表面平整、光洁。
4、保护层:涂膜防水层完成经过验收合格后,应按设计要求要求进行保护层施工。
Technical way:
1. Surface finishing: Keep the surface plane, solid, clean without oil dirt, dust.. The iternal angle and externl angle, pole root and other details should be strongly processed in advance, and do extra ply process; could use non-woven fabrics or fiberglass cloth as extra material.
2. lamination process: coat on the base with strike –off board or roller, bottom unchanged will be good, details could be painted and brushed with peniko.
3. topping coating: dilute the paint with water and do roller coating on the surface for one time to make surface neat and clean.
4. protection layer: after film waterproof layer is inspected passed, should construct the protection layer as design requirement.
注意事项
1、本产品施工时温度不宜低于5℃,雨雾天、风沙天不能施工。
2、基层有明水、起砂、浮尘现象时,应对基层进行处理后才能做防水涂层。
3、防水涂层应完全干固后方进行下一道工序的施工。
4、室内施工时保持通风,有利涂层干固。
Cautions:
1. keep it under 5℃ when in construction, no work should be done in foggy, rainy, windy and dusty days.
2. when there is obvious water, sugaring and fly ash, should not do waterproof coating until the base is processed.
3. no next process should be done until the waterproof coating is totally dry and solid.
4. keep the room in good ventilation, good for coating to be dry and solid